RIX Industries Flow Downs

3

Description:

CHEM ANALYSES IAW MIL-STD-767

Clause:

CERTIFIED TEST REPORTS FOR CHEMICAL ANALYSES OF BASIC RAW MATERIALS AND/OR PIECE-PARTS, NOT ASSEMBLIES IAW MIL-STD-767 FOR DETRIMENTAL MATERIALS 1 COPY 1. CERTIFIED TEST REPORTS SHOWING ACTUAL RESULTS OF ALL CHEMICAL ANALYSES REQUIRED BY PARAGRAPH 3 FOR EACH LOT OF MATERIAL FURNISHED IS REQUIRED. TEST REPORTS SHALL BE IDENTIFIED WITH THE ELECTRIC BOAT CORPORATION PURCHASE ORDER NUMBER, ITEM NUMBER, THE MATERIAL SPECIFICATION/ REVISION (INCLUDING COMPOSITION, TYPE, CLASS, GRADE OR CONDITION) AS APPLICABLE AND INDICATE THE SAME HEAT OR TRACEABILITY NUMBER THAT IS MARKED ON THE MATERIAL SUPPLIED. RETESTS MAY BE PERFORMED AS PERMITTED BY THE SPECIFICATION INVOKED. TEST REPORTS SHALL BE THOSE ISSUED BY THE ORGANIZATION PERFORMING THE TESTS OR EXACT COPIES THEREOF; DATA TRANSCRIBED TO ANOTHER ORGANIZATION'S FORM ARE NOT ACCEPTABLE. THE CERTIFIED TEST REPORTS (EXCEPT FOR MILL OR INDEPENDENT LABORATORY TEST REPORTS) SHALL INCLUDE A STATEMENT THAT :THE TEST RESULTS SHOWN IN THIS REPORT ARE THE RESULTS OF TESTING PERFORMED BY OUR ORGANIZATION:. 2. THE SELLER SHALL FURNISH CERTIFICATION THAT THE ITEMS FUR- NISHED ON THE PURCHASE ORDER ARE IN FULL COMPLIANCE WITH ALL PURCHASE ORDER AND SPECIFICATION REQUIREMENTS;THAT THE TEST REPORTS REPRESENT THE ACTUAL ATTRIBUTES OF THE ITEMS FURNISHED AND THAT THE TEST RESULTS ARE IN FULL COMPLIANCE WITH ALL APPLICABLE SPECIFICATIONS AND ORDER REQUIREMENTS. NOTE: THE ABOVE CERTIFICATION SHALL BE SIGNED AND DATED BY THE SELLER'S AUTHORIZED REPRESENTATIVE. 3. THE PURCHASE ORDER WILL SPECIFY BY ALPHA DESIGNATOR THE ELEMENT(S)/COMPOUND(S) FOR WHICH TEST REPORTS ARE RE- QUIRED THE TEST REPORT(S) WILL INSURE CONFORMANCE TO THE FOLLOWING LIMITS. A) ANTIMONY LESS THAN 250 PPM B) ARSENIC LESS THAN 250 PPM C) BISMUTH LESS THAN 250 PPM D) BROMINE LESS THAN 250 PPM E) CADMIUM LESS THAN 250 PPM F) CHLORINE LESS THAN 250 PPM G) IODINE LESS THAN 250 PPM H) LEAD LESS THAN 250 PPM J) LEACHABLE CHLORIDES LESS THAN 250 PPM K) MAGNESIUM LESS THAN 250 PPM L) MERCURY LESS THAN 10 PPM M) PHOSPHORUS LESS THAN 250 PPM O) SULPHUR LESS THAN 250 PPM R) TIN LESS THAN 250 PPM S) ZINC LESS THAN 250 PPM T) FLOURIDE LESS THAN 250 PPM U) CHLORIDE LESS THAN 250 PPM V) BROMIDE LESS THAN 250 PPM 4. THE TEST REPORT(S) SHALL BE ATTACHED TO THE PACKING LIST AND SECURED TO THE PACKAGE/CONTAINER. IF THE PACKING LIST AND THE TEST REPORT(S) ARE PLACED INSIDE A PACKAGE, THEIR LOCATION SHALL BE INDICATED ON THE EXTERIOR OF THE PACKAGE. WHEN TWO OR MORE HEATS OR LOTS ARE SHIPPED AT ONE TIME AGAINST ONE ITEM OF THE PURCHASE ORDER, THE PACKING LIST OR TEST REPORTS SHALL INDICATE THE QUANTITIES SHIPPED AGAINST EACH HEAT OR LOT. TEST REPORT(S) ARE REQUIRED FOR EACH SHIPMENT.